Finish 1: Anodized Aluminum. Anodizing changes the microscopic texture of the surface and changes the crystal structure of the metal near the surface. Thick coatings are normally porous, so a sealing process is often needed to achieve corrosion resistance. Anodized aluminum surfaces, are harder than aluminum but have low to moderate wear resistance that can be improved with increasing thickness or by applying suitable sealing substances. Anodic films are generally much stronger and more adherent than most types of paint and metal plating, but also more brittle. This makes them less likely to crack and peel from aging and wear, but more susceptible to cracking from thermal stress. Suitable Applications: Contract and Residential Environs. Content: Coloured Aluminum Sheet.

Finish 2: Smoked Tempered Glass. Tempered glass refers to glass whose molecular structures change greatly after heated at high temperature (at 650℃, it starts to become soft) and quenched and thus there appears even and strong pressure stress on glass surface as well as even and strong tensile stress inside, to multiple mechanical strength of glass. This kind of glass is regarded as being 4 to 5 times stronger than regular glass of the same thickness. Tempered glass are safety glass. It reduces the risk of injury due to its nature of breaking into small, circular pieces instead of sharp, jagged shards. It is widely applied in places which have high requirements for mechanical strength and safety such as glass door, curtain wall for building, elevation windows, interior partition, furniture, as well as partitions close to sources of heat and places which are subject to severe thermal shock. As heat strengthened glass does not explode by itself, it is widely used in the furniture industry. Suitable Applications: Contract and Residential Environs. Content: Tempered Glass.